|
||||||
| Date/Report Number ..110111.WY-2-C-ET Item: VINTAGE COPPER DIALED WYLER ALL STAINLESS STEEL SINGLE CASED WYLER E 1080 ETA 1080 WITH NOS BLACK INSERT FLEX BAND | ||||||
| Description of item: VINTAGE
COPPER DIALED WYLER ALL STAINLESS STEEL SINGLE CASED WYLER E 1080 ETA 1080 WITH NOS BLACK
INSERT FLEX BAND 29.6 x 37 MM W/O CROWN WITH 1950 WTLER E 1080 MODIFIED ETA 1080
Features manual wind sweep second INCAFLEX BALANCE CONDITION WATCH IS FINE TO
MINT
Estimated Retail Replacement Value $ 599.00 |
||||||
| Reports are supplied at the request of the customer and it is for the customer's exclusive use. Reports express an opinion of the time of the examination of the jewelry. This report is for customers use only for the following two purposes, indicating estimated retail replacement value to obtain insurance coverage, or for the purpose of providing geological information. goldsmith Works does not guarantee that the appraisal valuation will result in a sale at the price. Estimated retail replacement value is arrived after analyses of what the approximate high retail cash asking price is for labor, materials, and design. These prices may be substantially higher than actual transaction or warranty with regards to any item described in the report, since jewelry grading is not an exact science, this report represent the best opinion of the company. GoldSmith Works is in no case responsible for differences that occur by repeated grading by other experts in the field and/or use of other standards, norms, methods or criteria other than those used by GoldSmith Works. GoldSmith Works is expressly held harmless by customers including, but with out limitation for any claims or actions that may arise out of negligence in connection with the preparation of this laboratory report, or actions based upon the customer's use of the report. The information on the carat weight, clarity grade, color grade on the report is approximate due to the limitations in jewelry grading. The item was tested, graded, and examined under 10x magnification using the techniques and equipment available to GoldSmith Works, including fully corrected triplet loupe, binocular microscope, master color comparison guides, diamond color comparison tools, electronic carat balance, non-contact optical measuring device, and ancillary instruments necessary at the time of Exam |
COPPER DIALED
WYLER
ALL
STAINLESS STEEL
SINGLE CASED
WYLER E 1080
ETA 1080
WITH
NOS BLACK INSERT FLEX BAND
29.6 x 37 MM
W/O CROWN

Paul Wyler presented his first 16 and 19-line precision movements to the public in 1927. The particularity of these was the ICAFLEX balance wheel, which was legendary at the time.
The Wyler Incaflex balance wheel is protected along its diameter by two curved, elastic arms, which absorb any shocks to the balance wheel.
In addition to producing his own calibres, Wyler also modified movements of other large-scale producers and sold these on to other watch companies. In some cases, the basic calibre was changed so much that the movements should actually be considered as Wyler calibres.
In 1937 the WYLER INTRODUCED THE WATER-RESISTANT watch that was not fitted with the conventional soft gaskets.
The crystal was pressed in between the edge of the case and a pressed or screwed bezel, the gap between the winding shaft and the watch case was sealed hydraulically by fitting the winding shaft and bushing together, in the same material, to 1/500mm
1950 WYLER
OUTLINED RAISED LUME NUMERALS
BLACK AND LUME MILITARY HANDS
BLACK CHAPTER RING
ALL STAINLESS STEEL CASE
SWEEP SECONDS CHAPTER
NOS BLACK AND STEEL FLEX
CASE SUPER CLEAN
THIS PICTURE IS FROM GSW/GSWW ARCHIVES
@2004 GOLDSMITHWORKS ALL RIGHTS RESERVED
THIS PICTURE IS FROM GSW/GSWW ARCHIVES
@2004 GOLDSMITHWORKS ALL RIGHTS RESERVED
ORIGINAL CRYSTAL
ONE PIECE STEEL CASE
ALL STEEL ONE PIECE CASE
BASE ETA 1080
1950
WTLER E 1080
MODIFIED
ETA 1080
Features
manual wind
sweep second
INCAFLEX BALANCE
Data
10.5''', Dm= 23.3mm
H= 4.15mm
15/17/19/21 jewels
f = 18000 A/h
power reserve 42h